Our ramps are the heaviest duty ramps available.  They are designed and built to last a life time.  Our ramps are all T6061 structural aluminum.  The frames are made with 1 x 1 x 1/8 square aluminum tubing and l  l/4 x 1 1/4 x 1/8 aluminum angle.  The tracking are the Superglides (www.superclamps.net) which are the best available.  They are all hand welded.  They are designed so they can be used for ATV's,  motorcycles or snowmobiles.  

 

 

ATV & Motorcycle

 

The ramps have quick release hinge pins so the ramps can be disassembled to be used for motorcycle ramps.

 

Snowmobile:

 

The ramps are designed so the snowmobile ski can slide up the outside ramps without interfering with the drive belt which sits independently of the ski on the centre section of the ramps.  The centre ramp is 5 in. shorter than the outside ramps which allows the snowmobile to land in the bed of truck without being hung up on the centre ramp, allowing quick removal of the ramps.  The brackets which rest on the tailgate are designed so the snowmobile will slightly drop onto the ramp which will eliminate hanging up. The optional traction frame,  which will allow for slow controlled loading, is also made of 1 x 1 x 1/8 aluminum and folds neatly into the unit for storage.

 

 

SPECS:

 

Length  75.5 in.

 

Width  24 in. folded

 

Width  49 in. unfolded

 

Outside ramp (2)  12 in.

 

Inside ramp  24 in.

 

Weight  59 lbs.